Silicone rubber hot pads 3d ngwa nbipute akwa dị ọkụ

Igwe ọkụ silicone rọba na-ekpo ọkụ 3d ngwa nbipute akwa dị ọkụ na-egosi onyonyo

Nkọwa dị mkpirikpi:

The silicone roba heaters nwere uru nke thinness, lightness na mgbanwe.Ọ nwere ike melite okpomọkụ nyefe, mee ngwa ngwa okpomọkụ na ibelata ike n'okpuru usoro nke ọrụ.Fiberglass mesikwuru silicone roba stabilizes akụkụ nke heaters.

Kpọtụrụ anyị > RỊỌRỌ OKWU

Email:elainxu@ycxrdr.com

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa ngwaahịa

Igwe na-ekpo ọkụ silicone rọba bụ ụdị ihe nkiri dị gịrịgịrị nke na-ekpo ọkụ n'elu ọkụ eletrik, na nha ọkọlọtọ nke 1.5mm, Inweta wires nickel chrome ma ọ bụ 0.05 mm ~ 0.10mm nickel chrome foils gbara ọkpụrụkpụ nke etinyere na ụfọdụ ụdị, akụrụngwa kpo oku na-eji ọkụ na-eduzi. na ihe mkpuchi ihe n'akụkụ abụọ, ma mechaa na okpomọkụ dị elu na-anwụ anwụ na-emepụta na ịka nká ọgwụgwọ okpomọkụ. N'ihi ntụkwasị obi ya dị elu, ngwaahịa ahụ na-asọmpi nke ukwuu mgbe atụnyere ngwaahịa ihe nkiri ọkụ eletrik ndị ọzọ nke na-enwekarị ihe mado dị ka graphite mado ma ọ bụ resistor paste, wdg. mkpuchi na mkpuchi ihe. Dị ka ụdị ihe nkiri na-acha uhie uhie dị nro nke enwere ike itinye ya n'ọrụ n'akụkụ dị iche iche gbara agba, enwere ike ịmepụta ọkụ ọkụ silastic n'ụdị na ike dị iche iche.

Okpomọkụ arụ ọrụ	-60 ~ + 220C
Oke/ọdịdị oke	Obosara kacha nke sentimita 48, enweghị ogologo ogologo
Ọkpụrụkpụ	~ 0.06 inch (Single-Ply) ~ 0.12 inch (Dual-Ply)
Voltaji	0 ~ 380V. Maka voltaji ndị ọzọ biko kpọtụrụ
Ike	Ndị ahịa akọwapụtara (Max.8.0 W/cm2)
Nchekwa okpomọkụ	N'elu fiusi thermal, thermostat, thermistor na ngwaọrụ RTD dị ka akụkụ nke ngwọta njikwa okpomọkụ gị.
waya ndu	rọba silicone, eriri ike SJ
Mgbakọ Heatsink	Nko, anya nku anya, ma ọ bụ mmechi. njikwa okpomọkụ(Thermostat)
Ogo ire ọkụ	Sistemụ ihe na-ere ọkụ na UL94 VO dị.

Isi oru data

Agba: uhie

Ihe: mere nke silicone roba

Ụdị: DR usoro

Ike ọkọnọ: AC ma ọ bụ DC ọkọnọ ike

Voltaji: ahaziri dị ka achọrọ

Ngwa: kpo oku / na-ekpo ọkụ / mgbochi mmiri / mgbochi ntu oyi

Uru

1. Silicone Runner Heating Pad / Mpempe akwụkwọ nwere uru nke ịdị arọ, ịdị nro, nnyapade na mgbanwe.
2. Ọ nwere ike melite nnyefe ọkụ, mee ka ikpo ọkụ dịkwuo ọkụ ma belata ike n'okpuru usoro ọrụ.
3. Ha na-ekpo ọkụ ngwa ngwa na okpomọkụ ntụgharị arụmọrụ dị elu.

Atụmatụ maka silicone rubber heater

1.Maximum okpomọkụ na-eguzogide ọgwụ: 300 ° C
2.Insulating mgbochi: ≥ 5 MΩ
3.Mkpakọ ike: 1500V/5S
4.Fast okpomọkụ mgbasa, edo okpomọkụ nyefe, ozugbo okpomọkụ ihe na elu thermal arụmọrụ, ogologo ọrụ ndụ, na-arụ ọrụ mma na adịghị mfe ịka nká.